Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Once you have setup Beacons you can start managing them.

  1. Click on the Beacons tab on the left hand side of the portal.
    1. You can change the view by click the buttons on the right side of the window.
  2. You will be able to see General information about each beacon.

Square View:

In this view you can see general information about the Beacons such as:

...

In table view, you will have more options to tweak your Beacons.

In this view you can see general information about the Beacons such as:

...

  1. Filter Beacons
    1. Choose the column you would like to filter by.
    2. Press the three lines on the top of the specific column
    3. Choose the method you would like to filter by.
    4. Fill in the required fields
    5. Click Filter
      **To clear, press the lines again and click clear
  2. Send Updates
    There are three types of Updates you can send
    First, tick the boxes of the Beacon you would like to send updates to.
    1. General
      1. Click Send Update
      2. Choose General
      3. Fill in the desired fields
      4. Click "'Update X Beacon(s)"'
    2. Configuration
      1. Click Send Update
      2. Choose Configuration
      3. Fill in the desired fields
      4. Click "'Update X Beacon(s)"'
    3. Metadata
      1. Click Send Update
      2. Choose Metadata
      3. Fill in the desired string
      4. Click "'Update X Beacon(s)"'
  3. Export History


  4. Exporting History can be done in two ways,
    1. Single Beacon Export
      1. From any list, click a Beacon.
      2. Click the history button located under the Beacon name.
      3. Chose the type of history you would like to export
      4. Chose the time interval
        **Bigger intervals will make averages of smaller ones
      5. Pick the start and end time and date
      6. Click Export to CSV
    2. Multiple Beacon Export
      1. From Table view tick all Beacons you would like to export history
      2. Click History button
      3. Chose the type of history you would like to export
      4. Chose the time interval
        Bigger intervals will make averages of smaller ones
      5. Pick the start and end time and date
      6. Click Export to CSV
  5. Delete Beacons
    1. Single Beacon Delete
      1. From any list, click a Beacon
      2. Click delete button located under the Beacon name.
      3. Confirm delete
    2. Multiple Beacon Delete
      1. From Table view tick all the Beacons you would like to delete
      2. click delete
      3. Confirm delete

 

Single Beacon Management.

From any view, click the beacon you would like to view/edit.

 

  1. General Tab
    In this tab you can:
    1. Change name
    2. Manage Tags
    3. Manage Dynamic URL
    4. See Various information such as
      1. Managing BluFi
      2. RSSI 
      3. Temperature
      4. Battery Level
      5. Last Sync
      6. SID-64
      7. Beacon Manager
      8. Firmware Revision
      9. Type
      10. MAC address
  2. Configuration Tab

    In this tab you can
    1. Lock Beacon to be cloud managed only
      **Can only be updated through a BluFi
    2. Change iBeacon Settings
    3. Enable or Disable Sensors
  3. Metadata Tab
    1. Insert JSON formatted metadata to be used for extra information on the Beacon that isn't regularly supported by Bluzone.
    2. i.e Terminal, Aisle, Height, Color, Type of Beacon, Other forms of identification.
  4. Location Tab

    1. Change location of the Beacon
    2. Change Place on map of the Beacon
  5. Selfie
    1. See the Photo that was uploaded while provisioning.
  6. Jobs
    1. History of jobs that were done on the Beacon.
  7. Delete a beacon
    1. Click the delete button under the Beacon name.
    2. Confirm delete
  8. Track Beacon (Future Release)

 

 

 

 

...

Filter by label (Content by label)
showLabelsfalse
max5
spacesPDP
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel = "kb-how-to-article" and type = "page" and space = "PDP"
labelskb-how-to-article

...