Points to know when installing the no calibration RTLS. (Provisioning Videos)
- Ensure all BluFi are placed with minimal obstructed view, recommendation is placing at 4 feet or higher above the floor.
- Ensure no metal is directly in-front of BluFis. – Tables, chairs, cabinets, etc, that are within 6 feet or less from the BluFi is not recommended.
- For good Trilateration, beacon should be seen by at minimum of 6 BluFis. Meaning there's that many BluFi within a 20~25 Meter Radius from where you are tracking.
- IMPORTANT: Make sure BluiFis are on Multi-Channel mode, and every beacon is using Asset Tracking template.
- Do note; : some oscillation of beacon position is normal for non-calibration RTLS. For more accurate and faster latency, calibration is preferred. To improve oscillation in non-calibration, see point f below.
- Some improvement of oscillation may be improved via: select by selecting the settings tab and change changing the Bucket, Overlap & Period each to 3000 ms or more. This will add latency of approximate 5 seconds or more to the results, but it will smooth the oscillation of the location. Increasing it to 4000 or 5000 will smooth even further.
Please see image below:
Related articles
Filter by label (Content by label) |
---|
showLabels | false |
---|
max | 5 |
---|
spaces | PDP |
---|
showSpace | false |
---|
sort | modified |
---|
reverse | true |
---|
type | page |
---|
cql | label = "rtls" and type = "page" and space = "PDP" |
---|
labels | RTLS |
---|
|
...